Skip to navigation Skip to content

Search for:

The Firehouse
Our Products
Media and Information
My account
Department Orders

The Firehouse
Our Products
Media and Information
My account
Department Orders

$0.00 0 items

Home / aa948a_e881459e74e04213b6e10a10d9e39c3b~mv2_d_3474_1955_s_2.jpg / aa948a_e881459e74e04213b6e10a10d9e39c3b~mv2_d_3474_1955_s_2.jpg

aa948a_e881459e74e04213b6e10a10d9e39c3b~mv2_d_3474_1955_s_2.jpg

FDNY Shield Order Form #4
• 6-1/4″ High x 6-1/4″ wide
• No-Rockers,
• Open text on the bottom
• Hundreds of color combinations
• Three text styles
• Three Number Styles
• Four Numbers Max. in the center.
or Bugles

Post navigation

Previous post: aa948a_e881459e74e04213b6e10a10d9e39c3b~mv2_d_3474_1955_s_2.jpg

© GB Shields 2023
Built with Storefront & WooCommerce.

My Account
Search

Search for:
Cart 0

Sizing Instructions

Using a piece of string or body cord, drape the string or body cord over your shoulder as if it was your radio strap.
Adjust the cord such that one end is at the location where the top of your holster would connect to the strap.
Bring the other end of the cord together with the end that you have positioned in step 2.
Holding both ends of the cord with one hand, take the cord off your shoulder and lay it on a flat surface. Mark the cord where the long end of the cord is. Measure from the end of the cord to your mark, and that is the length you need.

Please be sure to follow the instructions on this card that will be attached to your strap. Loss of hardware and/or parts of your strap will occur if you fail to follow instructions. Replacement hardware and strap parts are available for an additional cost. When applying the thread locker, avoid getting it on the leather.

Sizing Instructions

Using a piece of string or body cord, drape the string or body cord over your shoulder as if it was your radio strap.
Adjust the cord such that one end is at the location where the top of your holster would connect to the strap.
Bring the other end of the cord together with the end that you have positioned in step 2.
Holding both ends of the cord with one hand, take the cord off your shoulder and lay it on a flat surface. Mark the cord where the long end of the cord is. Measure from the end of the cord to your mark, and that is the length you need.

Reg: 50″-60″
Large: 55″-65″
XL: 60″-70″
XXL: 65″-75″

***If you choose to have a fitted strap, your strap will be made so that the total length is from each of the clasps that attach to your radio holster with the least amount of tolerance possible.***

The drawing to the left displays how each style shield is measured. Both the Classic and the Vintage styles are available in the 6″ and 6½” sizes of most of the shields we have to offer. In other words, this drawing DOES NOT mean you can’t get a 6″ Vintage or a 6½” Classic style shield. It merely shows how each style of shield is measured.